Automatic strapping machine for long products: tubs, bars and profiles
In SAIZAR we design and manufacture Automatic Strapping Machines for long products: Tubes, Bars and Profile bundles.
Our strapping machines can strap transversally any long product with steel or polyester (PET) strap.
Each machine is tailored to the dimensions, format of the bundle, the production rate and the available space of the plant.
What is an Automatic Strapping Machine for long products?
It is an automatic machine which straps transversely around a bundle of long products without the need of an operator intervention.
In each strapping position, the strapping machine performs the complete cycle: feeding of the strap, collection of the strap, sealing and cutting.
A bundle requires several straps along its length, and this type of equipment ensures that the bundle is properly shaped, tensioned and sealed, with the same finish for all bundles to be strapped.
How bundles are strapped: Settings of the Strapping Machine
The strapping machine can be fixed or can move to each strapping position. We choose the best option according your Layout, available space and your production rate.
Fixed Strapping Machine with moving bundles
The bundle goes through the conveyors and is stopped in each strapping position, while the strapping machine remains fixed.
The bundle’s steps are controlled by the conveyor, and the strapping machine thread the strap whilst the bundle is moving, making it possible to complete the strapping in a shorter time.
Moving Strapping Machine with fixed bundles
The bundle is fixed in place while the strapping machine is displaced sideways to each strapping position.
This type of equipment is usually installed when the customer does not have enough space to move the bundle, but it is slower than a fixed strapping machine, as the strapping process will not begin until the machine is in position.
Multiple Strapping Machines operating at the same time
For very long products with high Production rates, multiple automatic strapping machines can operate simultaneously.
In this case, the bundle goes through a conveyor to each strapping position and multiple strapping machines carries out multiple strappings at the same time.
It is possible to install these equipments with combined strapping heads allowing to use both, steel and polyester strap.
Solutions according the product
Tubs, bars and profiles are strapped transversally, but each one presents different challenges.
Tube bundles strapping
We strap tube bundles of round, square, rectangular or hexagonal shapes.
With these bundles, depending on the format, there is hardly any flat surface for the sealing. Therefore, the sealing system with linker (seal) is the most common in tube bundles, as it is the most suitable for this minimal flat area.
More information in packaging lines for tube bundles.
Bar bundles strapping
The bar bundles are typically preformed using a system installed on the conveyor. For this type of application, the bundle must be formed before the strapping machine performs the strapping.
During the strapping process, various types of consumables can be introduced, such as labels, rigs, protectors etc. depending on the client’s needs.
In these type of applications, it is common to use the sealing system with linkers, as the bundles usually have round shape.
Transverse strapping is used either with the bundles being fixed or with the bundles in motion. More information in packaging lines for bar bundles.
Profile bundles strapping
The profile bundles have very variable geometrical shapes.
A forming system consolidates the bundle shape before the strapping to reduce misalignments and gaps. The number of strapping positions are defined depending the length and dimensions of the bundle.
In these type of applications, any sealing system can be used, as they can be adapted to this type of products
More information in packaging lines for profile bundles.
Steel or PET strap and type of sealing
We work with steel and polyester (PET) strap, in industrial widths of 16,19, 25 and 32mm.
Our strapping heads are designed and manufactured in-house, covered by international patents. All changes are made from the control desk (HMI).
- Strapping head for steel strap: The sealing can be with linker (seal), by notching or by TIG welding points. Depending on the type of product to be strapped, dimensions of the product and the requirements of the customer, any of these three sealing options can be chosen.
- Strapping head for polyester strap: The sealing is by friction-vibration.
- Combined strapping head: Capable of working with both types of straps, steel or polyester, with different measures and all of it on the same strapping station.
The choice depends on the product, the required tension, the bundle form, the weight of the product, how the bundle is handled and the requirements of the customer.
Protectors and elements introduced during the strapping
The Automatic Strapping Machine can introduce automatically the following consumables:
- Perimetral cardboard and corner protectors, to prevent the strap marking the product.
- Wooden blocks, supplied from storage units of up to 100units.
- Tags or labels with data of the bundle, fixed by the strapping made.
- Rings for further handling with crane.
Integration in you end of line process
The strapping machine is synchronized with roller or chain conveyors, trolleys, lifts or cranes.
The bundle may be positioned in the center or aligned to one side. This decision determines the design of the strapping machine, so we decide it at the beginning.
If you also need to carry out the forming, labelling or the insertion of any other consumable, we can do it with no problem, offering a turnkey solution for the project.
Benefits of automating the strapping of long products
Automating the strapping of tubes, bars and profiles provides more stable bundles, more safety and higher productivity than the manual strapping.
Repetible strapping:
same tensioning and sealing at each strapping position
Stable bundles:
the forming, the compaction or conforming prior to the strapping, reduces misalignments and openings of the bundles
More safety:
less manual handling of long and heavy bundles
Centralized control:
parameters and operations via the HMI of the control desk
Ready for 24/7:
easy maintenance and spare parts directly from the manufacturer
More productivity than manual strapping:
with multiple strapping machines operating in parallel if the production rate requires it
Bundles prepared for dispatch:
automatic introduction of protectors, tags, wooden blocks and rings on the strapping process
Flexibility of formats:
round, hexagonal, square or rectangular bundles
Flexibility of consumables:
steel or PET in the same equipment
Proven experience:
more than 350 automatic strapping equipments sold and clients as ArcelorMittal, Tubos Aranda or Grupo Simec
Contact our technical department for a customised solution
What details do we need to determine your strapping machine
With this information our Technical Department can start preparing a tailored solution:
- Type of product (tubs, bars or profiles).
- Weight and maximum temperature of the bundle.
- Minimum and maximum measures of the bundle: width, height, length, and, if applicable, diameter and flat side.
- Shape of the product: round, hexagonal, square or rectangular.
- How does the bundle reach the strapping position: centered or aligned on a side by conveyors, carriages, elevators or craves.
- Target productivity in bundles per hour.
- Minimum and maximum number of strappings per bundles.
- Required strap (steel or PET, width and thickness) and type of sealing.
- Items to add: cardboard, corner protectors, wooden blocks, tags of labeling or rings.
- Available space, photos of the area and the final bundle.
Frequently asked questions
Which long products can you strap?
Tubes, bars and steel profile bundles. We work with round, hexagonal, square and rectangular bundles.
Is a fixed or mobile strapping machine better?
Depending on your layout, the available space, the length of the bundle and the Production rate. With the fixed strapping machine, the bundle goes to each strapping position; with a mobile strapping machine, the bundle remains stationary while the strapping machine is displaced to each strapping position.
How many strappings does a bundle of long products need?
It depends on the length, weight, transport and the customer’s requirements. We define with you the minimum and maximum number of strappings per bundle in each project.
Can multiple strapping machines operate simultaneously?
Yes, for very long products or high Production rates, multiple automatic strapping machines can strap simultaneously, even with combined strapping heads of steel and PET strap.
Which sealing method is best for a tube bundle?
The most common method is the sealing with linker (seal) as it is well adapted to the small flat surface of the bundle. We also perform sealing by notching or with TIG welding points in the steel strap and by friction-vibration on the PET strap.
Steel or PET strap for tubes, bars and profiles?
We work with both types of straps, in widths from 16 to 32mm. Depending on the type of bundle, it can used one strap or the other, and even with a combination strapping head, you can use both types of straps on the same strapping machine.
How can we prevent marking the material with the strap?
The strapping machine can automatically insert perimeter cardboards, corner protectors or wooden blocks before the strapping.
Can the bundle be strapped longitudinally?
No, in this kind of bundles it is not necessary to strap longitudinally, since only transversal strapping is required.
Can the strapping machine be integrated in an existing Production line?
Yes, we synchronize it with your conveyors, carriages, or elevators, whether on new or existing lines.
What information do we need to prepare an offer?
Product information, dimensions and weight of the bundle, shape, productivity, number of strappings, type of strap, and available space. You can send it to us from the  bundle strapping form.